ZIXITECHROBOTICS · FLEXIBLE SENSING
English中文
Product knowledge1 min read

Will the neck cover fit?

Start with dimensions. Then check the space that changes as the robot moves.

Neck-cover reference · fit depends on the robot assembly

The essentials

  • Measure the intended assembly, not a reference photograph.
  • Check clearance throughout the required movement.
  • Use a sample to review attachment and access.
On this page

Begin with the assembly

A flexible neck cover is developed around the robot’s head, neck and surrounding shoulders. Appearance alone cannot establish fit.

Prepare three views

Use a drawing for the actual robot revision when available.

  1. Front
  2. Side
  3. Rear
  • Neck height and upper/lower fitting dimensions
  • Shape and attachment features
  • Scale reference and areas that need access

Look through the movement

The available space changes as the head turns or tilts.

  • Find the closest neighboring parts.
  • Look for rubbing, bunching or pinching.
  • Use the robot’s setup instructions for the review.
Closure detail of a neck-cover sample · confirm the installation for your assembly

Include cables and access

Describe installation, removal and any access requirements.

  • Cable exits and accessible connectors
  • Proposed attachment and seam positions
  • Material, cleaning and operating-environment requirements

Let the sample answer

Check the sample on the intended assembly using the approved setup procedure.

  • Attachment and available slack
  • Access points
  • Rubbing, pinching or interference through movement

Send a useful enquiry

Bring dimensions, photographs or drawings, motion requirements and cable-access details. ZixiTech can discuss a neck-cover pattern and a separate sample component. Confirm the fit before agreeing the production configuration.

Discuss your application ↗